Hot Air Oven

CE for Hot Air Oven

The applicable standard for getting CE Certificate for Hot Air Oven is BS EN 61010-1:2010. 

For getting CE Certification for Hot Air Oven, certain requirements need to be fulfilled as mentioned in the standard. These are:

  • Protection against hazards from fluids
  • Protection against spread of fire
  • Protection against electric shock
  • A.C voltage test

 

 

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Hot Air Oven is issued.

Decanter Centrifuge Machine

CE For Decanter Centrifuge Machine

The applicable standard for getting CE Certificate for Control Panel for Decanter Centrifuge Machine is BS EN 60204-1:2009.

For getting CE Certification for Control Panel for Decanter Centrifuge Machine, certain requirements need to be fulfilled as mentioned in the standard. These are:

  • High voltage test
  • Insulation resistance test
  • Earth contact resistance test
  • Technical documentation
  • Electric motors and associated equipment

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Decanter Centrifuge Machine is issued.

Single Rotary Tablet Press

CE For Single Rotary Tablet Press

The applicable standard for getting CE Certificate for Single Rotary Tablet Press is BS EN 60204-1:2009. 

For getting CE Certificate for Single Rotary Tablet Press, certain requirements are to be fulfilled as mentioned in the standard. These are:

  • High Voltage Test
  • Insulation Resistance Test
  • Earth Contact Resistance Test
  • Accessories and Lighting

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Single Rotary Tablet Press is issued.

Sharp Blasters

You can get CE Certification for Sharp Blasters against the standard BS EN 61010-1:2010. 

BS EN 61010-1:2010 provides safety requirements for electrical equipment for measurement, control and laboratory use. The electrical equipment in this are:

  • Electrical test and measurement equipment
  • Electrical - industrial process control equipment
  • Electrical laboratory equipment

BS EN 61010-1:2010 applies to only computers, processors etc. which form a part of the equipment that is in the scope of the standard or designed for use with the equipment.

For getting CE Certification for Sharp Blasters, certain requirements need to be fulfilled, which are:

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Sharp Blasters is issued.

Automatic Spring Coiling Machine

You can get CE Certificate for Automatic Spring Coiling Machine against the standard BS EN 60204-1. 

BS EN 60204-1 covers the safety of all the electrical and electronic and electronic equipment and systems applied to the machines. This standard promotes:

  • Safety of persons and property
  • Consistency of control response
  • Ease of maintenance 

Where there is no dedicated product standard for machine, the verification shall always include:

  • That the electrical equipment complies with respective technical documentation
  • In the case of protection against indirect contact by automatic disconnection, protection by automatic disconnection shall be verified according to clause 18.2
  • Functional tests clause 18.6 

And may include 

  • Insulation resistance test
  • Voltage test
  • Protection against residual voltage

Plus more specified tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Automatic Spring Coiling Machine is issued.

Float Switch

You can get CE Certificate for Float Switch against the standards IEC 60730-2-15:2008 & IEC 60730-1:2015. For getting CE Certificate for Float Switch, some requirements need to be fulfilled.

These requirements are:

  • Protection against electric shock
  • Provision for protective earthing
  • Terminals and terminations
  • Moisture and dust resistance

Plus more specific tests as mentioned in the standard.

 

After theses tests are conducted, a test report is compiled and thereafter CE Certificate for Float Switch is issued.

Automatic Pump Controller

You can get CE Certificate for Automatic Pump Controller against the standards IEC 60730-2-6:2015 & IEC 60730-1:2015. For getting CE Certificate for Automatic Pump Controller, some requirements need to be fulfilled.

These requirements are: 

  • Pressure sensing
  • Protection against electric shock
  • Constructional requirements
  • Provision for protective earthing

Plus more specific tests as mentioned in the standard.

 

After conducting these tests, a test report is compiled and thereafter CE Certificate for Automatic Pump Controller is issued.

Control Panel Enclosures And Junction Box Enclosures

You can get CE Certificate for Control Panel Enclosures and Junction Box Enclosures against the standard IEC 62208:2011. For getting CE Certification for Control Panel Enclosures and Junction Box Enclosures, some requirements have to be fulfilled. 

These requirements are:

  • Service conditions
  • Design and construction
  • Marking
  • Static loads

Plus more specific tests as mentioned in the standard.

 

After conducting all the tests, a test report is compiled and thereafter CE Certificate for Control Panel Enclosures and Junction Box Enclosures is issued.

Electro Dynamic Vibration Shaker

You can get CE Certificate for Electro Dynamic Vibration Shaker against the standard BS EN 60204-1 2006+A1 2009. For getting CE Certification for Electro Dynamic Vibration Shaker, some requirements have to be fulfilled.

These requirements are:

  • High Voltage Test
  • Insulation Resistance Test
  • Earth Contact Resistance Test

 

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Electro Dynamic Vibration Shaker is issued.

Solar Street Light

You can get CE Certificate for Solar Street Light against the standard IEC 60598-1:2014 and 60598-2-3:2002. For getting CE Certification for Solar Street Light, some requirements have to be fulfilled as per the standard.

These requirements are:

  • Marking
  • Terminals and supply connection
  • Provision for earthing
  • External and internal wiring

 

Plus more specific tests as mentioned int the standard.

 

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Solar Street Light is issued.